

Lighting alarm type high-tension lever
1, usage profile:
High voltage switch lever is one of the most commonly used safety instruments power operation personnel, mainly used for power distribution transformer and line switch to stop transmission operation of equipment, such as on or off falling high-voltage isolating switch, insurance, etc. In the power system in practice we often encounter the following situations: (1) night operation, the operator with a switch rod, care workers holding the torch lighting, observing the effect not beautiful, not only waste of manpower, distracted, not convenient nor safe. (2) the traditional switch lever is fixed rod head commonly, if the isolating switch, dropping insurance such as equipment installation position with a switch rod rod head Angle is wrong, often causing rod only difficulty hook action object. (3) power failure, with a switch rod disconnected operation object, we must use electroscope to check electric power equipment, that is to say, power maintenance operation, must carry a switch rod and electroscope instruments with two kinds of safety operation, very inconvenient, and easy to don't check for leaks with electroscope electrical repair work, causing the operator contact charged earth wire lead to get an electric shock accidents. For this purpose our company has developed a kind of lighting and alarm function.
Two. Use instructions:
Charge voltage 220v 50Hz
Charge 2 to 4 hours for primary use
Please turn off the power supply when you are finished. Do not keep the battery for a long time. The maximum charge time is no more than 5 hours
If you don't have to charge every month for a long time
Do not do the whole experiment when the rod body is tested for withstand pressure, because of the electronic components in the top section, please rotate the bottom section for testing
When using remote control, the power supply should be turned on, remote control distance: 120 meters (empty space)
The electrical inspection of this product is the induction type: the induction distance is 60cm (according to the need to design separately).
Undervoltage function: when voltage is insufficient, the under-voltage indicator will be bright
The attention of lithium battery
Charge up to the standard time and procedure, even if it's the first three times
When the battery is too low, it should be charged as soon as possible
The activation of lithium batteries does not require special methods, and lithium batteries are naturally activated in normal use.
5, use caution matters
1, when using a switch rod, please turn on the power switch of all use a switch rod, prevent for failing to open the power switch, remote control can't remote electroscope self-checking and LED light switch.
Turn off the power switch when you are not using the lever, increase the battery life.

Copyright © 2016 Hebei Box-type Transformer Co., Ltd. 冀ICP备05028780号-1 Powerby: 300.cn ADD:Hebei Suning Appliance Electrical Materials Industrial Park | TEL: 086-317-5118888 086-317-5110000 | FAX: 086-317-5118777