DFW Cable Distribution Box (air - insulated) 40.5KV
DFW □□ -40.5 / 630-20 high-voltage cable distribution box is in stainless steel or steel box into three support insulators made of. Insulator top with a contact bus, feeder cable terminal from the contact bus leads.
The insulation distance between the three contact busbars reaches 350mm or more, and the insulation distance between the three contact busbars to ground is more than 350mm.
Use of environmental conditions
1. Ambient temperature is not higher than +40 ℃, within 24 hours an average of not more than +30 ℃. Ambient temperature not lower than -30 ℃.
2. There is no explosion or flammable danger in the surrounding medium, no gas or steam enough to damage the insulation and corrosion metal, no conductive dust.
3. Installation site without severe vibration and bumps, the installation gradient of not more than 5 °.
The altitude of the installation site shall not exceed 1000m.
Note: The installation site altitude above 1000m, the need to consult with the manufacturer.
The main technical parameters
Rated voltage: 40.5kV;
Rated frequency: 50Hz;
Rated current: enter and feed out are 630A;
Dynamic and stable current: 50kA (peak);
Thermal stability of current: 20kA (RMS) 4s;
Insulation level: frequency voltage phase, relative to 95kV / 1min;
Impact resistance: phase to phase, relative to 185kV (1.2 / 50μs);
Protection class: IP34;