DFW cable distribution box (with switch) 40.5
DFW-40.5 630 \ 20 cable distribution box for 40.5kV three-phase AC 50Hz distribution system, connecting cables, as the acceptance and distribution of power purposes.
Cable distribution box of the inlet and outlet to meet the cross-section of 50 ~ 300mm2 the use of power cables, this product can provide a single cable into the outlet, two-cable access to a variety of installation methods. Installation and maintenance is simple, no fire hazard, especially for industrial and mining enterprises and high-voltage transmission and distribution of energy use. Is a suitable for the use of cable transmission and distribution of new power distribution equipment.
Using SF6 gas insulated load switch, disconnector or circuit breaker. Distribution box front operation, side wiring, with the rear explosion-proof valve with fully guarantee the safety of operators and equipment.
Use of environmental conditions
1. Ambient temperature is not higher than +40 ℃, within 24 hours an average of not more than +30 ℃. Ambient temperature not lower than -30 ℃.
2. There is no explosion or flammable danger in the surrounding medium, no gas or steam enough to damage the insulation and corrosion metal, no conductive dust.
3. Installation site without severe vibration and bumps, the installation gradient of not more than 5 °.
The altitude of the installation site shall not exceed 1000m.
Note: The installation site altitude above 1000m, the need to consult with the manufacturer.
The main technical parameters
Rated voltage: 40.5kV;
Rated frequency: 50Hz;
Rated current: enter and feed out are 630A;
Dynamic and stable current: 50kA (peak);
Thermal stability of current: 20kA (RMS) 4s;
Rated short-term power frequency withstand voltage: phase, relative to 95kV / 1min; (dry state)
Rated short-time power frequency withstand voltage: fracture: 110KV; (dry state)
Rated lightning impulse withstand voltage: phase to phase, relative to 185kV (1.2 / 50μs);
Rated lightning impulse withstand voltage: fracture: 215KV;
Protection class: IP34; (shell)
Fully insulated, fully sealed structure, safe and reliable
A variety of wiring, installation is simple
Load switch small size, compact structure, easy to operate
Isolate the fault area, reduce the power cut area
Convenient line maintenance, maintenance