35kv insulated boots
35kv insulated shoe instruction manual
1, this product is suitable for electric power operating personnel operating voltage of 1000v the following basic safety tools, operating voltage between 1000v to 1500v as auxiliary safety equipment used foot protection boots.
2, the product factory insulation performance qualified. After the purchase of the boots, if found in the transport and storage process by the rain, damp moldy, aging and other abnormal changes should be to the statutory testing agencies for energy review test.
3, before use must be carefully checked, if found any damage should not be used.
4, the operation should be set into the boots trousers, do not with a variety of grease, acid, alkali, corrosive substances and contact with the front of the mechanical damage.
5, wear should always pay attention to the end of the end of the situation, after the end of the pattern worn away, especially after the exposed light-colored layer, it should not be used.
6, insulated boots should be stored in dry and ventilated room temperature -15 ℃ to +30 ℃, relative humidity of not less than 80% of the Treasury, away from the heat source 1 meter and leave the ground and wall 20cm or more.
7, insulated boots in the original packaging, since the date of production shelf life of 24 months, in the inventory or use according to national standards, each 6 months to carry out preventive tests.